How to Open a Safe Without a Key and Combination

How to Open a Safe Without a Key and Combination

Safe owners often lose the key to their digital safe and the keypad has no power. Or you have recently discovered that you have a safe in your home and it is locked inside, but you want to use the safe. But you can’t open safe ones without keys or combinations.

Don’t worry- you’ll be able to open the safe yourself.

Surprised!

Yes, today I have come up with some easy and interesting solutions for opening a safe without any keys and combinations.

Your safe box unlocks by applying the techniques correctly. So be patient and keep reading to learn how to unlock a digital safe without keys and combinations.

HOW TO OPEN A SAFE WITHOUT KEYS AND COMBINATION

From this Cover Apply the idea of your choice.

unlock safe using magnate

1. UNLOCK A SAFE BY USING A RARE EARTH MAGNET

It takes just a few seconds to open your digital safe with a rare earth magnet. Also, the nickel piece of sentry electronic safe can be opened using a magnet without any damage.

In that case, choose a neodymium magnet that is capable of pulling at least 200 pounds to open the safe box.

Caution: Neodymium magnets are quite strong and dangerous. The magnet will be very hard to pull in favor of a small metal ring. So you can put it in a crown royal bag to pull.

Keep your finger away from magnets and protection, use gloves if necessary. Pay special attention to your work when you use the magnet as this magnet can damage you or other materials very quickly.

How to crack safe:

Detect its solenoids to unlock digital safe boxes, nickel solenoids essentially activate affordable locks.
At the end of the solenoid detection, place the magnet under it and slide the magnet until the safe opens, and watch the magic.


2. UNLOCK GUN SAFE WITH A HAMMER AND CHISEL

You will need a chisel and a hammer in this process to open the digital safe. And it will take only 2 minutes to complete this process.

READ ALSO:   How to Secure a Gun Safe in An Apartment - 4 Effective Ways

Place your chisel at the top of the keypad. Then gently hit the chisel with a hammer to remove this part.
When you move the keypad you will see a silver knob, this silver knobs also needs to be removed by using a hammer and chisel.

After removing it, you will get a keyhole. Insert your finger into this keyhole and press the bottom button. Thus open your safe without keys and combinations.

Note: This process is very simple, but quickly repair your safe box at the end of the activity, so that you can keep things safe in it again.


3. OPEN THE LOCK USING A KNIFE

One of the amazing ways to open a safe is to use a knife, this process is so simple that you will be surprised. So let’s know how to open the lock with a knife.

This process will work if you have a keyhole in your safe box. Choose a hard knife to do the solution.

Place the pointed tip of the knife into the keyhole of the safe box, and stick it in the hole. And make sure the knife enters the hole and fits it well.

This time you need to break the lock, it takes a few seconds to complete. To open the lock, just shake the knife hard and wiggle. Your safe is unlocked, open the door.

You can apply this solution in a combination or in a safe box with a digital keypad.


4. OPEN THE LOCK WITH THE HELP OF A SCREWDRIVER

Using a screwdriver is a great solution to unlock your Safe box without keys and combinations.

Note: Safe can be opened easily with this method, but you will not be able to re-lock the safe box after opening the lock.

Take a screw, and place your safe box on a flat surface. Insert the tip of the screw into the safe keyhole, making sure it is well stuck. Now rotate the screw counterclockwise, remove the screw when you hear the locking mechanism break, and open the safe.

READ ALSO:   How To Keep A Gun Safe Dry And Moisture Free

5. OPEN THE SAFE WITH A PAPER CLIP

You can open it with a paperclip without damaging any part of the safe box.

In that case, all you have to do is:
Take a paper clip and straighten it. Using scissors or a wire cutter, divide the clip into two parts so that one part can be bent at a 90° angle and the other at a 45° angle.

This time insert one part of the paper clip (90 ° angle) under the keyhole and insert the other half (45° angle) above the keyhole. Make sure the clips go deep into the lock, turn it over until the safety lock is unlocked.


6. OPEN THE SAFE WITH A DRILL

If the combination is lost, your safe can be drilled as a last resort. If other steps fail then drilling is the easy solution.
Choose a strong drill, of course, it must be suitable for drilling through metal.

This time drill into the key slot of the safe box, continue drilling until you can disable the lock Open Safe.
However, the boxes are made of steel and other strong materials which makes drilling difficult. However, if it is safe to open after drilling, it can be repaired for reuse.


7. OPEN THE SAFE WITH A NAIL CUTTER FILLER

With just a nail cutter you can unlock your safe without any keys and combinations.

Take a nail cutter, then insert the pointed tip of the cutter into the keyhole of the safe box, make sure it fits well inside the keyhole.

Now move the tip of the cutter up and down, and turn it counterclockwise. Complete the process until the box is unlocked. When the PIN is released, open the door of the safe.


8. USING BORE SCOPE AND RESETTING

If you do not want to open in a safe drill method, then scoping is one of the options for you. This method like a drill, but this process is better than drilling.

READ ALSO:   How to Move a 2000 Pound Safe (Easily & Safely)

Note: Doing this process can damage your safe box. However, you can repair it.

You will need a Borescope to unlock the safe at this stage. Make a hole in the back of the digital safe, and insert the Borescope into the hole. Press the reset button and set any code. Now you open your safe box.


9. OPENING THE SAFE USING TUBULAR LOCK PICK (SOUTHARD 7 PINS)

Another reliable way to open your safe is to use a tubular lock pick. These are as simple as using keys.

The key can be unlocked very easily and quickly using premium SouthOrd Tubular Lock Picks. There is no harm to your safe in this process.

– Insert the pick into the lock, and turn it left and right. Then gently press the pick. Safe unlock.


10. COMMUNICATE WITH SAFE COMPANY

You can call the “Customer Service Center” for a safe opening. In that case, you create ownership documents.
If all the documents are correct, you will get the number and additional keys of your safe sequence, so that you can open the safe.


11. GET AN OVERRIDE KEY

Manufacturers provide an override key as a second way to access some common cheap safes. If you have this key, Locksmith may be able to get a copy of it or create a key from scratch. And using it you can unlock safely


12. RETRIEVING THE COMBINATION

If there is a dial, and you were able to find the serial number, the locksmith may be able to retrieve The original combination to the safe.

Most safe manufacturers will not provide the data over the phone to a consumer. They will come to your location to verify you are the owner.

Before trying The combination out, so long as the Combination has never been changed, this will open the safe. The locksmith Will then be able to reset the safe combination for you

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *